KnuKonceptz KNF-60 3 Way 0 Gauge Fused Distirbution Block 0 / 4 AWG Out

Description

Ebay Product Page
Store
About Us
Frequently Asked Questions
Policies
Shipping
Store Home
Amp Kits
Close Outs
Component Video Cables
Digital / Optical Cables
Distribution / Fuse Blocks
DVI & HDMI Cables
Fuses
Power Wire
RCA Cables
Speaker Wire
Subwoofer Cables
S-Video Cables
Terminals
3 Way 0 Gauge Fuse Distribution Block
The KNF-60x3 is the three way fused power distribution block designed for several large gauge in and outputs.
The KNF-60x3 has three total inputs, only one is required to power all three outputs, using the additional inputs makes adding batteries easier for high powered systems
The KNF60 uses 6 isolated ports in its
patent pending
design. Each is then linked, fused, or left open to configure the  block for your application's demands. Utilizing three platforms to  fuse or link these ports makes the KNF60 unlike any distribution block before it. Each output has room for two links or Mini-ANL fuses  allowing up to 240A of protection per circuit!
Each port on the KNF60 is capable of  accepting 0 gauge or 4 gauge power cable depending on the fitting  used. Now power for the largest installations can be easily be routed  through one block!
Fuse Size - 40A / 60A / 80A / 100A / 120A / 160A / 200A / 240A
(select three, note choice with payment - default 2x 80A 1x160A will be sent if NO OPTION SELECTED)
Configuration:
To setup your four way fuse block, install the  Mini-ANL links across the lower center fuse platform, connecting the two center ports together. The two center ports are now your input and  "pass through" port. The pass through port can be used to link your  front battery to your rear battery(ies) in one seamless connection into  the block. Fuses are then inserted from the center ports using the upper and vertical fuse platforms, connecting the upper and lower, left/right output ports.
US Patent#  D695,698 & 9,306,379
KonFUSED System Introduction
Specifications
Dimensions L x W x H:
4.9" x 4.6" x 1.85"
Total Ports:
6
Fittings Included:
Four 0 Gauge, Two 4 Gauge
Fuse Type:
Mini-ANL (AFC)
Fuse Count:
6 fuses and 4 links come with the KNF-60x3
Max Load:
240A x 3
Finish:
Black Chrome
Product FAQ
How do the Kompression Terminals Work?
Strip the jacket off the cable; Insert the wire into the fitting; fold the copper strands as shown in the photo; Tighten the fitting into the block, compressing the cable into place. This results in 360 degrees of contact area, unlike set screw blocks that have just the one high pressure point. The Kompression Fitting allows more strand/block interaction, which results in less resistance and more current flow.
KonFUSED System Introduction
How can I connect 2 Gauge wire with these terminals?
The 0 Gauge fitting can be used with a 2 gauge cable as well
Can I purchase additional fittings for this model?
Yes, additional fittings are available for purchase under our installation accessories page. They are {{detail_product_description}}.99 each
Additional Images