KnuKonceptz KNF-60 2 Way 0 Gauge Power & Ground Distribution Block 0 / 4 AWG Out

Description

Ebay Product Page
Store
About Us
Frequently Asked Questions
Policies
Shipping
Store Home
Amp Kits
Close Outs
Component Video Cables
Digital / Optical Cables
Distribution / Fuse Blocks
DVI & HDMI Cables
Fuses
Power Wire
RCA Cables
Speaker Wire
Subwoofer Cables
S-Video Cables
Terminals
0 Gauge 2 Way Power AND Ground Distribution
The KNF-60x2 is a two way fused power and ground distribution block in one.
Accepting 0 gauge input and providing one 0 gauge and one 4 gauge output for BOTH power AND ground. Included with this block are your choice if two fused outputs and 4 Mini-ANL Links to connect the three ground ports into one.
The KNF60 uses 6 isolated ports in its
patent pending
design. Each is then linked, fused, or left open to configure the  block for your application's demands. Utilizing three platforms to  fuse or link these ports makes the KNF60 unlike any distribution block before it. Each output has room for two links or Mini-ANL fuses  allowing up to 240A of protection per circuit!
Each port on the KNF60 is capable of  accepting 0 gauge or 4 gauge power cable depending on the fitting  used. Now power for the largest installations can be easily be routed  through one block!
Fuse Size - 40A / 60A / 80A / 100A / 120A / 160A / 200A / 240A
(select two, note choice with payment - default 60A 120A will be sent if NO OPTION SELECTED)
Overview
- KNF Series Fuse / Distribution Blocks use our compression fittings to secure the input and output cable connections. By changing the fitting type, the installer can select from 1/0 or 4 gauge input or output. This same block is expandable to a 3 or 4 way fuse distribution block for power, a second block would be need for 3 and 4 way power and ground distribution
US Patent#  D695,698 & 9,306,379
Notes
-
When installing power and ground into one confined area, please take extra caution connecting and installing fuses and links. It is best to configure the fuses and links prior to connecting the KNF-60 to either 12V power or ground sources until the unit is mounted and configured for your application.
KonFUSED System Introduction
Specifications
Dimensions L x W x H:
4.9" x 4.6" x 1.85"
Total Ports:
6
Fittings Included:
Four 0 Gauge, Two 4 Gauge
Fuse Type:
Mini-ANL (AFC)
Fuse Count:
4 fuses and 4 links come with the KNF-60x2
Max Load:
240A x 2
Finish:
Black Chrome
Product FAQ
How do the Kompression Terminals Work?
Strip the jacket off the cable; Insert the wire into the fitting; fold the copper strands as shown in the photo; Tighten the fitting into the block, compressing the cable into place. This results in 360 degrees of contact area, unlike set screw blocks that have just the one high pressure point. The Kompression Fitting allows more strand/block interaction, which results in less resistance and more current flow.
KonFUSED System Introduction
How can I connect 2 Gauge wire with these terminals?
The 0 Gauge fitting can be used with a 2 gauge cable as well
Can I purchase additional fittings for this model?
Yes, additional fittings are available for purchase under our installation accessories page. They are {{detail_product_description}}.99 each
Additional Images